DHCP Failed to assign ip address

Your computer was not assigned an address from the network (by the DHCP server) for the network card with network address 0x001EEC6F8B82.The following error occured :0x79.Your computer will continue to try and obtain an address on its own from the network address(dhcp server).

Log name : microsoft windows DHCP client Events/Admin
Source : dhcp client
level : error
event id : 1001
user : LOCAL SERVICE
opcode : ip address not assigned
task category : address configuration state event

I obtained the above error because,dhcp fails to assign ip address automatically to my network.Below is the proof for this error,

solution :

• check your network by using ping command in command prompt.
• verify if the fault is identified and corrected according to instructions provided in microsoft technet (http://technet.microsoft.com/en-us/library/dd380233(WS.10).aspx) - DHCP client ip lease validity.

Error code 0x2 DHCPv6-client:

An error occured in initializing the interface.The error code is:0x2

Log name : microsoft windows dhcp version 6 events/admin

source : dhcp v6- client

Task category : address configuration state event.
Event id : 1008

Proof for this error,

solution :
To solve this error you must know how to configure the 'dhcp client network interface'.For dhcp client configuration and verification refer the following microsoft technet site http://technet.microsoft.com/en-us/library/cc774826(WS.10).aspx


See Also : The post related to network connection.
error code 651 -Broadband connection