wrong device driver causes bluescreen error

Its about blue screen error,one of the highest commonly encountered error in the world. User subjected to unexpected illegal or wrong action causes some system files(i.e .dll or .sys) not working properly which leads to blue screen written with few lines of error message and technical code in hexadecimal format, what's calling as "stop error" codes. Sometimes the screen may remain blue for a while or it might suddenly disappear and restart the system. It won't occur with prior warnings, so it is very essential to save your data as needed always.

How i was affected by this error. Action followed by the results are given as follows,  i am installing device driver for my transcend pendrive, instantly i received this "page in fault" blue screen error that was stated in the format "PAGE_FAULT_IN_NONPAGED_AREA" Before when this error happens i did installation completely  in the way by manually selecting files from my computer provided with type of device and then finally i have finished my installation. Oh, how dare it was, suddenly after getting installed, my computer screen gets changed to blue in color indicated with few STOP error codes. I was frustrated because i have lost all my unsaved data-s. Following are the technical information about the error : STOP error: 0x00000050 (0x8B518000,0x00000000,0x83271B93,0x00000000).

What's mean by page fault in non paged area, is this a script error?... or is there any problem in  indexing the files. Don't get panic to fix this fault, we will guide you how to resolve it .Dont get bewildered yourself as that of, just note down the technical information(i.e STOP ERROR) and try google it or note it to the service center.

Possibilities:
It might be the wrong driver, which is not compatible and so there might be such an error. However this page in fault will not produce any critical conditions to your system. But it is recommended to check your device for working in its intended way. User can able to use their system as usual, but there might be loss of data if it is unsaved.

Recommended:
It is recommended to check new version for that driver. Normaly we can download it directly from the company site. Recall what you did before the error occurs and try to execute on another system, thus you can figure out what could be the problem.

BCCode a unexpected shutdown bluescreen event

I am still working, suddenly after a certain interval of time my computer gets restarted with displaying  an stop error message over the bluescreen window. Following are one of the event that i faced while i am browsing.

Windows has recovered from an unexpected shutdown.
Problem signature:
Problem Event name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
LocaleID: 16393

Additional information about the problem: BCCode: a BCP1: 00000014 BCP2: 00000002 BCP3: 00000000 BCP4: 828E5711 OS VERSION: 6_1_7600 Product: 256_1
Proof captured:

 

IRQL_NOT_LESS_OR_EQUAL

A problem has been detected and windows has been shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.

Technical information:
STOP: 0X0000000A (0X00000053, 0X00000002, 0X00000000, 0X820781B2)

 STOP: 0X0000000A (0XC0788A14, 0X00000002, 0X00000001, 0X8A888028)

To fix this blue screen 'irql not less or equal' error refer http://technet.microsoft.com/en-us/library/cc957609.aspx.

Technical error on blue screen windows 7

A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such us caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
Technical Information:
*** STOP: 0X0000008E (0XC000001D, 0X82CB9628, 0X8AE81A04, 0X00000000)

Collecting data for crash dump ...
Initializing disk for crash dump ...
Begining dump of physical memory
Dumping physical memory to disk: 100
Physical memory dump complete.
Contact your system admin or technical support group for further assistance.
Proof:

Recommended post:
PAGE_FAULT_IN_NONPAGED_AREA

/NO EXECUTE= OPTIN ERROR windows 7

Edit boot options:
Edit windows boot options for: windows 7 extreme edition R1-X86
Path: \windows\system32\winload.exe
Partition: 1
Hard disk: 3cf2eea
/NO EXECUTE =OPTIN

After switched on my computer,i found that my system gets booting for multiple times and suddenly gets hanged to looks like black or blank screen having several cross horizontal lines scribble over it.
Computer configuration where the error occurred:
model: compaq presario c700 notebook pc supported for vista home basic, but installed with windows 7 operating system.


Then,i tried several troubleshooting options like system recovery, repair disc, startup check mode including cpu and memory test but nothing was found to be better to fix the error.
Proof:

Note: If user try to restart the system for multiple times in order to prevent this optin error, then there may also the chance for seeing an another error window as 'logon process initialization failure'.
Error message: Interactive logon process initialization has failed.Please consult the event log for more details.
Recommended:
booting safe mode causes blue screen

fix registry errors without software

Most of the computer users, they dont know, what is regedit?. And they are not ready to handle as they thought without proper knowledge handling the regedit might causes system to behave unexpectedly. Yes that's also true improper registry usage might sometimes make your computer useless.

It's very common, while browsing the system we are doing installation, removal of certain program ,files etc with intend to getting done our task correctly.   If any of these action is not getting perfectly done, then it will find the way for some unwanted files to get remain improperly in your registry. This will affect your system's performance. So, what can we do?..There are software available for fixing improper registry setup. Here we will see, how to find the missing or improper registry setup manually. We can predict or trace the type of error from the following keywords and its status listed below.

• IStatusEvents- This interface points to the missing type library.
• Lattice Class- This object points to the missing type library.
• IAS OLE-DB Data Store- This object points to the missing application id.
• Directory Class Container- The file type points to the missing CLSID.
• CONDUIT.ENGINE- The key HKEY_CLASSES_ROOT\Conduit.Engine\CLSID for this type contains no data.
• Microsoft Office OneNote Protocol Handler for windows desktop search- The context menu entry shell for this file type is not assigned to any program.
• Citrix ICA Connection- This file type points to the missing icon.
• Incomplete entryMozilla firefox- This uninstall entry does not contain any data needed by windows to remove the program or component.
• Disk Management Snap-in object library- The subkey 1.0 \HELPDIR for this type library contains no data.
• Display Panning CPL extension- This object points to the missing InProcServer32 deskpan.dll.