Connection failed with error 633
The modem or other connecting device is already in use or is not configured properly.
Try again
or setup the connection anyway.
The above error 633 occurs while trying to connect to the internet by dialup or broadband connection.And the modem may not configured properly.This error occurs in the system,who is trying to access the public network with wrong credentials(i.e username and password).Below is the real proof for this error.
Solution:
Configure the modem properly with knowledge of network administrator.If you try to access others network which is already in use by others,then provide appropriate username and password for authenticating the network service.
Openning port..
Error 633: The modem (or other connecting device) is already in use or is not configured properly.
If the error occurs for dial-up connection then the COM port that the network connection attempted to use is already in use by active another network connection or another process (for example phone line monitoring program like fax program).Close the application that is blocking the use of the com port.
If it is broadband connection then the broadband device that the network connection attempted to use cannot be opened.Make sure that the requested hardware,such as cable modem is functioning properly.
For VPN (virtual private network) refer the below picture.And also find out solution by using troubleshooting modems which is also mentioned in the following pictures.
The modem or other connecting device is already in use or is not configured properly.
Try again
or setup the connection anyway.
The above error 633 occurs while trying to connect to the internet by dialup or broadband connection.And the modem may not configured properly.This error occurs in the system,who is trying to access the public network with wrong credentials(i.e username and password).Below is the real proof for this error.
Solution:
Configure the modem properly with knowledge of network administrator.If you try to access others network which is already in use by others,then provide appropriate username and password for authenticating the network service.
Openning port..
Error 633: The modem (or other connecting device) is already in use or is not configured properly.
If the error occurs for dial-up connection then the COM port that the network connection attempted to use is already in use by active another network connection or another process (for example phone line monitoring program like fax program).Close the application that is blocking the use of the com port.
If it is broadband connection then the broadband device that the network connection attempted to use cannot be opened.Make sure that the requested hardware,such as cable modem is functioning properly.
For VPN (virtual private network) refer the below picture.And also find out solution by using troubleshooting modems which is also mentioned in the following pictures.
No comments :
Post a Comment